Help mindat.org|Log In|Register|
Home PageMindat NewsThe Mindat ManualHistory of MindatCopyright StatusManagement TeamContact UsAdvertise on Mindat
Donate to MindatSponsor a PageSponsored PagesTop Available PagesMindat AdvertisersAdvertise on MindatThe Mindat Store
Minerals by PropertiesMinerals by ChemistryRandom MineralSearch by minIDLocalities Near MeSearch ArticlesSearch GlossaryMore Search Options
Search For:
Mineral Name:
Locality Name:
Keyword(s):
 
The Mindat ManualAdd a New PhotoRate PhotosLocality Edit ReportCoordinate Completion ReportAdd Glossary Item
StatisticsThe ElementsMember ListBooks & MagazinesMineral Shows & EventsThe Mindat DirectoryHow to Link to MindatDevice Settings
Photo SearchPhoto GalleriesNew Photos TodayNew Photos YesterdayMembers' Photo GalleriesPast Photo of the Day Gallery
bannerbannerbannerbannerbannerbanner

Mineral tack with NO oil?

Posted by OT. Ljøstad  
avatar
OT. Ljøstad December 10, 2011 09:34AM
Where to buy mineral tack that contains NO oil?
OT. Ljøstad
Norway
avatar
Andy Klotz December 13, 2011 05:18PM
Hi Ot, I was just looking on ebay and came across some mineral tack that is non greasy. I have not used it before but am wanting to purchase some also. heres the web site- www.ebay.com/.../Mineral-Tack-Specimen-Mounting-Putty..
You might want to get a better opinion though.
Cheers!
avatar
Knut Edvard Larsen December 15, 2011 09:28PM
I have had good experience with using a tack that is sold as "Tetningslist " for bathrooms at Clas Ohlson,in Norway their product nr. 34-4264 , see http://www.clasohlson.no/Siteseeker/Search_o.aspx?q=Tetningslist.
.
avatar
John P Walsh May 17, 2012 01:45AM
I am looking for mineral tack also but the guy on ebay wants $6.00 for shipping which is more that half the cost of the tack. So what knind of a deal is that?? Can anyone help????

John
avatar
Paul De Bondt May 17, 2012 11:45AM
Hi all,

I use this : http://www.mineralbox.biz/epages/15501820.sf/en_GB/?ObjectPath=/Shops/15501820/Categories/Montagekitt

Very fine product and fast delivery.

I hope this helps.

Take care and best regards.

Paul.
avatar
Luca Baralis May 17, 2012 11:49AM
I'm afraid that tack with NO oil/grease doesn't exist...
I've definitively switched to hot glue: no grease, better looking, cheap and easy to buy in each hardware store / big store.

Luca Baralis
avatar
Jolyon & Katya Ralph May 17, 2012 01:26PM
Agree with Luca, every mineral tack, whether specialist for minerals or not, contains some oils. There are some that contain less oils, but they are the ones that are more likely to dry out and crack after a few months/years.

Regardless, if you use tack to secure important specimens, check and if necessary replace it every year or so.

Hot glue is much maligned, mostly due to ignorance of how to remove it (it's much easier to remove hot glue from most specimens than stubborn dried up mineral tack remenants.

Jolyon
avatar
Nelse Miller May 17, 2012 01:49PM
Seeing this discussion has led me to ask two questions. First, how does one remove hot glue from delicate minerals which have been mounted on a base of whatever? Second, how does one remove the oil from "mineral tack" that has wicked up into porous specimens? I am still struggling to remove these unsightly stains from a collections of micromounts I purchased. So far I have tried soaking in isopropanol and acetone with minimal results.

Nelse
avatar
Luca Baralis May 18, 2012 01:32PM
Usually you can easily remove hot glue wetting in with some drops of alcool (better white aka not coloured alcool of course!).
For oil or tack residual from delicate specimens I think you need some kind of solvent but, sorry, I can't help you in a better way.

Luca Baralis
avatar
Ron Layton May 23, 2012 06:07PM
This stuff has no oil or residue but t will stick to the specimen and sometimes leaves some of the wax in the cracks and vugs where it was mounted. I never tried to remove any of it with heat or chemicals since I mount my specimens for keeps. Heres a link:Museum Wax
avatar
Donald Peck May 24, 2012 03:44PM
I have tried the wax used by printers to do "paste-ups". It works well with any size specimen, but I think it is a little sensitive to temperature, If it gets cold the specimen may separate. Otherwise, it does not dry out or discolor. One can soften it by kneading and it is easy to use. For mounting micros, I usually use Sorbo white glue that is used by librarians. It is a little more viscous than the usual white glue, doesn't discolor, dries fairly quickly, and is reliably permanent.
avatar
Patrick Haynes (2) May 24, 2012 07:43PM
I have been using blue "poster putty" made by Duck. It is the best I have found. Does not leave grease spots and does not dry out like the off-white brands. I have not seen it at Staples, but Office Max has it near their poster boards.
avatar
OT. Ljøstad July 07, 2012 08:56PM
To remove mineral tack residue or oil from mineral tack from a specimen you can use white spirit og diesel.

OT. Ljostad
avatar
Edward Bayley April 21, 2017 10:06PM
Is it true that the preferred mineral mounting tack/putty is actually a product called Terostat (a type of adhesive cement)? If so, which Terostat product is it, and how are people sourcing it? Is "Geo-Tack" and "Min-tack" just a name it's given after being repurposed?
avatar
Casey Montgomery April 29, 2017 04:58AM
I just bought some from shannons haven't tried it out yet. It didn't say VII on it but it appears to be the same one and was confirmed by others. Next part is just speculation but I saw when I searched for it pictures of what looked like a calking use for a dryer to the wall. Guessing if good enough for high vibration of dryer and heat and intended long term use it might really be good stuff. I haven't had a chance to get it but check out elmer's tack. Some packages say never dries out. Might be a stretch but apparently it is ment for long term use but might need to work it a bit to get it ready to use.
avatar
Casey Montgomery April 29, 2017 05:04AM
@OT

Sorry for ignorance. White spirit og diesel? Do you have a link? Where to get it? Every time I search for it it brings up something different.
avatar
Casey Montgomery April 29, 2017 05:15AM
Have a question on elmers glue. There is any difference in the elmers white glue and the elmers clear glue? Standard stuff. I bought the clear glue for mounting a ways back. Does anyone know of any real difference? Especially in terms of mounting? I may end up going Donalds route with the Sorbos white glue. It just makes too much sense. If librarians use it for preservation sounds like it may be a good idea, that is essentially what we are hoping for.
avatar
Timothy Greenland April 29, 2017 08:41AM
Casey,

I think OT meant "White spirit or Diesel". An easy typing error!

Cheers

Tim



Edited 1 time(s). Last edit at 04/29/2017 08:41AM by Timothy Greenland.
avatar
David Von Bargen April 29, 2017 09:35AM
White spirits https://en.wikipedia.org/wiki/White_spirit
aka Paint thinner - hardware store
diesel - most gasoline stations.
avatar
Donald B Peck April 29, 2017 04:38PM
Casey and others,

There is a typo in my post. The white glue I use is "Sobo: Premium Craft & Fabric Glue".

Don
avatar
Casey Montgomery April 30, 2017 06:00AM
Good deal sorry makes sense. Thank you all. Oh btw trying out the shannons min tack using it to tack the internal label to the back of the box. So far it is every tacky almost can't get it off fingers. First impressions good stuff.
avatar
Casey Montgomery April 30, 2017 06:27AM
*very tacky* darn auto correct lol
avatar
Rick Turner April 30, 2017 08:54AM
The mineral tack sold by Kranz is oil-free, as far as I know. I've been using it for at least 15 years now and never had a problem with it, anyhow. They attend a number of the big shows - Ste Marie and Munich for example - and will ship it to you if necessary if you order from their web catalog - this is at www.krantz-online.de

Rick
avatar
Robert Rothenberg April 30, 2017 02:29PM
Casey wrote: "it is very tacky almost can't get it off fingers." I would consider this a possible problem. If it is that sticky, can you get it off the specimen? There has been some discussion on Mindat about different techniques for doing this, but one of the issues seems to be that it sometimes is very difficult to remove all the tack. I have run into this problem with a yellow tack that came on some mounts from Europe.

Bob
Sorry, only registered users may post in this forum.

Click here to login



bannerbannerbannerbannerbannerbanner
Mineral and/or Locality  
Mindat.org is an outreach project of the Hudson Institute of Mineralogy, a 501(c)(3) not-for-profit organization.
Copyright © mindat.org and the Hudson Institute of Mineralogy 1993-2017, except where stated. Mindat.org relies on the contributions of thousands of members and supporters.
Privacy Policy - Terms & Conditions - Contact Us Current server date and time: May 27, 2017 07:21:17
Go to top of page