Raghavan, M., Thomas, G. (1979) Effects of substructure on the mechanical properties of Fe-Ni-Co-C alloys. Metallurgical Transactions A, 10 (11). 1665-1673 doi:10.1007/bf02811699

References Listed

These are the references the publisher has listed as being connected to the article. Please check the article itself for the full list of references which may differ. Not all references are currently linkable within the Digital Library.

	S. K. Das and G. Thomas:Trans. ASM, 1969, vol. 62, p. 659.
	D. H. Huang and G. Thomas:Met. Trans., 1971, vol. 2, p. 1587.
	Raghavan, M., Thomas, G. (1971) Structure and mechanical properties of Fe−Cr−C−Co steels. Metallurgical and Materials Transactions B, 2 (12). 3433-3439 doi:10.1007/bf02811625
	J. McMahon and G. Thomas:Third Int. Conf. on Strength of Metals and Alloys, vol. 1, p. 180, Institute of Metals/Iron and Steel Institute, Cambridge, England, August 1973.
	R. A. Clark and G. Thomas:Met. Trans. A, vol. 6A, p. 969.
	B. V. N. Rao: Ph.D. Thesis, University of California, February 1978; LBL Report no. 7361.
	G. Thomas:Met. Trans. A, 1978, vol. 9A, p. 297.
	M. Carlson, B. V. N. Rao, R. O. Ritchie, and G. Thomas:Proc. of Int. Conf. on Strength of Metals and Alloys, vol. 2, p. 509, Nancy, France, August/ September 1976.
	Thomas, Gareth (1971) Electron microscopy investigations of ferrous martensites. Metallurgical Transactions, 2 (9). 2373-2385 doi:10.1007/bf02814875
	P. M. Kelly and J. Nutting:Proc. Royal Soc., 1960, vol. A259, p. 45.
	P. M. Kelly and J. Nutting:J. Iron Steel Inst., 1961, vol. 197, p. 199.
	Chilton, J.M, Kelly, P.M (1968) The strength of ferrous martensite. Acta Metallurgica, 16 (5). 637-656 doi:10.1016/0001-6160(68)90137-5
	Speich, G. R., Leslie, W. C. (1972) Tempering of steel. Metallurgical Transactions, 3 (5). 1043-1054 doi:10.1007/bf02642436
	A. R. Marder and G. Krauss:Trans. ASM., 1967, vol. 6, p. 651.
	G. R. Speich and P. R. Swann:J. Iron Steel Inst. 1965, vol. 203, p. 480.
	A. R. Marder and A. O. Benscoter:Trans. ASM, 1968, vol. 61, p. 293.
	Magee, C.L, Davies, R.G (1971) The structure, deformation and strength of ferrous martensites. Acta Metallurgica, 19 (4). 345-354 doi:10.1016/0001-6160(71)90102-7
	C. L. Magee and R. G. Davis:Met. Trans., 1970, vol. 1, p. 2927.
	W. F. Brown and J. E. Srawley:Plane Strain Crack Toughness Testing of High Strength Materials, ASTM STP 410, Philadelphia, 1967.
	W. S. Owen, E. A. Wilson, and T. Bell:High Strength Materials, V. F. Zackay, ed., John Wiley and Sons, Inc., NY, 1965.
	G. Thomas and S. K. Das:J. Iron Steel Inst., 1971, vol. 209, p. 801.
	G. R. Speich:Trans. TMS-AIME, 1969, vol. 245, p. 2553.
	C. Zener:Trans. Am. Inst. Min. Eng. 1946, vol. 167, p. 550.
	M. Oka and C. M. Wayman:Trans. ASM, 1969, vol. 62, p. 370.
	G. Thomas:Iron Steel Int., 1973, vol. 46, p. 451.
	R. H. Richman:Trans. TMS-AIME, 1963, vol. 227, p. 159.
	B. V. N. Rao and G. Thomas: unpublished research, 1978.
	G. Thomas: Battelle Colloquim on Fundamental Aspects of Structural Alloy Design, R. I. Jaffee and B. A. Wilcox, eds., Plenum Pub. Co., 1977.

See Also

These are possibly similar items as determined by title/reference text matching only.

	Raghavan, M., Thomas, G. (1971) Structure and mechanical properties of Fe−Cr−C−Co steels. Metallurgical and Materials Transactions B, 2 (12). 3433-3439 doi:10.1007/bf02811625
	Maki, T., Wayman, C. M. (1976) Substructure of ausformed martensite in Fe-Ni and Fe-Ni-C alloys. Metallurgical Transactions A, 7 (10). 1511-1518 doi:10.1007/bf02656393
	Schuster, G. B. A., Yeske, R. A., Altstetter, C. J. (1980) The effects of hydrogen on the creep rupture properties of fe-ni alloys. Metallurgical Transactions A, 11 (10). 1657-1664 doi:10.1007/bf02660520
	Liu, C. T., Inouye, H. (1979) Control of ordered structure and ductility of (Fe, Co, Ni)3V alloys. Metallurgical Transactions A, 10 (10). 1515-1525 doi:10.1007/bf02812017
	Carlson, M. F., Narasimha Rao, B. V., Thomas, G. (1979) The effect of austenitizing temperature upon the microstructure and mechanical properties of experimental Fe/Cr/C steels. Metallurgical Transactions A, 10 (9). 1273-1284 doi:10.1007/bf02811983
	Cheng, G. H., Dayananda, M. A. (1979) Multiphase diffusion in Fe−Ni−Al system at 1000°C: II. Interdiffusion coefficients for β and γ alloys. Metallurgical Transactions A, 10 (10). 1415-1419 doi:10.1007/bf02812005
	Cozar, R., Pineau, A. (1974) Influence of the co/ni ratio on the γ and γ" precipitation in fe-ni-co-ta alloys. Metallurgical Transactions, 5 (11). 2471-2472 doi:10.1007/bf02644030
	Freed, Robert L., Sande, John B. (1979) The effects of devitrification on the mechanical properties of Cu46Zr54 metallic glass. Metallurgical Transactions A, 10 (11). 1621-1626 doi:10.1007/bf02811693
	Raghavan, V. (1995) Effect of manganese on the stability of austenite in Fe-Cr-Ni alloys. Metallurgical and Materials Transactions A, 26 (2). 237-242 doi:10.1007/bf02664662
	Thomas, G., Chen, Yen-Lung (1981) Structure and mechanical properties of Fe-Cr-Mo-C alloys with and without boron. Metallurgical Transactions A, 12 (6). 933-950 doi:10.1007/bf02643474
	Jin, S., Mahajan, S., Brasen, D. (1980) Mechanical properties of Fe-Cr-Co ductile permanent magnet alloys. Metallurgical Transactions A, 11 (1). 69-76 doi:10.1007/bf02700439